User:Scdertin: Difference between revisions

Latest revision as of 15:37, 26 March 2022

User data
Name	Samantha Dertinger
Interests	3D printing, OSH
Groups	777 Users 2019 MOST users
Courses	MY4777
Registered	2018
Impact	23,245
Contributions	Open source ventilator 777 Big Money Project Recyclebot v4.0ac High-Temperature Syringe Printer:MOST Artificial lung method MOST Open Source Automated Scanning Monochromator Prosthetic Plastic Literature Review Pandemic Ventilator Creating Syringe Printer using a Lulzbot Mini Waterproofing 3-D prints literature review

I am a recent graduate in Biomedical Engineering at Michigan Technological University. I was a part of the Pavlis Honors College, both as a learning facilitator and as a student. In the Summer of 2019, I had the opportunity to go abroad to Tanzania with two other students to work on aiding a small community with local problems (i.e STEM education). I was a member of the Innovative Global Solutions Enterprise with the main task of designing, and constructing, the poly-carbonate packaging for a pandemic ventilator. I was recently a member of the Michigan Tech Open Sustainability Technology Lab working on using recyclable material to 3D-print medical applications, as well as building an open-source ventilator for COVID-19. I now work at DEKA Research and Development as a Validation and Verification Test Engineer, where I am able to use the engineering skills I have obtained to help create medical devices.

Main Research Projects[edit | edit source]

Creating Filament from the Windshield Wiper Material to 3D-Print Prosthesis - Prosthetic Plastic Literature Review
Using a Heated Syringe Delta Printer to Print Applications Using Recycled Waste - High-Temperature Syringe printer:MOST
Open Source ventilators - Open source ventilator
Artificial Lung Testing - Artificial lung method MOST

Publications[edit | edit source]

Research Projects I've Helped With[edit | edit source]

Creating a Syringe Printer out of a Lulzbot Mini - Creating Syringe Printer using a Lulzbot Mini
Testing and Using the Lulzbot Bioprinter - Lulzot Bioprinter

Literature Reviews Written[edit | edit source]

Waterproofing 3D-Prints: Waterproofing 3-D prints literature review

MSE4777 - Open Source 3D Printing Class[edit | edit source]

Mini Projects[edit | edit source]

The top view of a functional Athena II Printer
The failure assignment assigned to learn what a failed print looks like
Bear Rock Wall Climber using OpenSCAD: https://www.thingiverse.com/thing:3894803
A customized and customizable piano book holder using OpenSCAD: https://www.thingiverse.com/thing:3895088
A spider screen cover using FreeCAD: https://www.youmagine.com/designs/spider-light-cover
A viking-themed candle holder using Blender: https://www.youmagine.com/designs/viking-inspired-candle-holder

Big Projects[edit | edit source]

Anatomy Bone Puzzle for Educational Aid: https://myminifactory.com/object/3d-print-anatomy-puzzle-103529
Beginning Stages of the Printed Parts for an Automatic Monochromator: https://3dprint.nih.gov/discover/3dpx-012405
Final Automatic Scanning Monochromator: https://www.appropedia.org/Open_Source_Automated_Scanning_Monochromator
Llama Phone case for Samsung Galaxy S8: https://www.myminifactory.com/object/3d-print-llama-phone-case-107201

@@ Line 1: / Line 1: @@
-[[File:pc.jpg|thumb|upright=0.75]]I am a fourth year Biomedical Engineer at Michigan Technological University. I am a part of the Pavlis Honors College, both as a peer mentor and as a member. In the Summer of 2019, I had the opportunity to go abroad to Tanzania with two other members from the college to work on aiding a small community with local problems (i.e STEM education or health education). I was a member of the Innovative Global Solutions Enterprise with the main task of designing, and constructing, the poly-carbonate packaging for a pandemic ventilator. I am currently a member of the Michigan Tech Open Sustainability Technology Lab working on using recyclable material as filament to 3D-print prosthesis.
+[[File:meandlung.jpg|thumb]]
-'''Projects'''
+{{User data
+| name =
+| interests = 3D printing, OSH
+| groups = 777 Users 2019, MOST users
+| courses = MY4777
+| affiliations =
+}}
-''Creating Filament from the Recyclable Material:''
+I am a recent graduate in Biomedical Engineering at Michigan Technological University. I was a part of the Pavlis Honors College, both as a learning facilitator and as a student. In the Summer of 2019, I had the opportunity to go abroad to Tanzania with two other students to work on aiding a small community with local problems (i.e STEM education). I was a member of the Innovative Global Solutions Enterprise with the main task of designing, and constructing, the poly-carbonate packaging for a pandemic ventilator. I was recently a member of the Michigan Tech Open Sustainability Technology Lab working on using recyclable material to 3D-print medical applications, as well as building an open-source ventilator for COVID-19. I now work at DEKA Research and Development as a Validation and Verification Test Engineer, where I am able to use the engineering skills I have obtained to help create medical devices.
-The recyclable material was run through a device known as the Recyclebot. This device was created by a previous student to allow the use of any material to become filament to use in a 3D-printer. The link below shows the details about the Recyclebot.
-https://www.appropedia.org/Recyclebot_v4.0ac
-''Using the Homemade Filament to create Prosthesis:''
+== Main Research Projects ==
-The filament is then inserted into the 3D-printer. For this project, the Lulzbot TAZ 6 is being used with a special head called the Lulzbot TAZ Aerostruder Tool Head. This type of head allows for flexible filament to be used in the machine.
-'''Literature Reviews:'''
+* Creating Filament from the Windshield Wiper Material to 3D-Print Prosthesis - [[Prosthetic Plastic Literature Review]]
-https://www.appropedia.org/Waterproofing_3-D_prints_literature_review
+* Using a Heated Syringe Delta Printer to Print Applications Using Recycled Waste - [[High-Temperature Syringe printer:MOST]]
+* Open Source ventilators - [[Open source ventilator]]
+* Artificial Lung Testing - [[Artificial lung method MOST]]
+== Publications ==
-[[Category: MOST users]]
+* [https://www.sciencedirect.com/science/article/pii/S0921344920301312?via%3Dihub Technical pathways for distributed recycling of polymer composites for distributed manufacturing: Windshield wiper blades]
+* [https://www.sciencedirect.com/science/article/pii/S2468067220300407?via%3Dihub RepRapable Automated Open Source Bag Valve Mask-Based Ventilator]
+== Research Projects I've Helped With ==
+* Creating a Syringe Printer out of a Lulzbot Mini - [[Creating Syringe Printer using a Lulzbot Mini]]
+* Testing and Using the Lulzbot Bioprinter - [[Lulzot Bioprinter]]
+== Literature Reviews Written ==
+* ''Waterproofing 3D-Prints:'' [[Waterproofing 3-D prints literature review]]
+== MSE4777 - Open Source 3D Printing Class ==
+=== Mini Projects ===
+<gallery>
+File:Funct3Dprint.jpg | The top view of a functional Athena II Printer
+File:Xyz_Calibrationcube.jpg| The failure assignment assigned to learn what a failed print looks like
+File:BearRockwall.jpg | Bear Rock Wall Climber using OpenSCAD: https://www.thingiverse.com/thing:3894803
+File:CustomizeProject.jpg | A customized and customizable piano book holder using OpenSCAD: https://www.thingiverse.com/thing:3895088
+File:ScreenCover_miniproject.jpg | A spider screen cover using FreeCAD: https://www.youmagine.com/designs/spider-light-cover
+File:vikingproject.jpg | A viking-themed candle holder using Blender: https://www.youmagine.com/designs/viking-inspired-candle-holder
+</gallery>
+=== Big Projects ===
+<gallery>
+File:CompletedBoard.JPG | Anatomy Bone Puzzle for Educational Aid: https://myminifactory.com/object/3d-print-anatomy-puzzle-103529
+File:Monochromator.jpg | Beginning Stages of the Printed Parts for an Automatic Monochromator: https://3dprint.nih.gov/discover/3dpx-012405
+File:Monochromator_Final.jpg| Final Automatic Scanning Monochromator: https://www.appropedia.org/Open_Source_Automated_Scanning_Monochromator
+File:llamacase.jpg| Llama Phone case for Samsung Galaxy S8: https://www.myminifactory.com/object/3d-print-llama-phone-case-107201
+</gallery>