Lulzbot Bioprinter Study & Methods[edit | edit source]
Authored by Samantha Dertinger and Nicki Gallup
Methods[edit | edit source]
- Turn the printer on by flipping the power switch. The printer will ask if you would like to run a configuration test to re-home the device, click yes.
- After the homing process is complete, click on 'Menu' to set the desired settings for the printer.
- Manually place the syringe needle in the middle of the Petri dish, making sure the needle is not touching the dish.
- Press 'Media' to see the downloaded Gcode files and the 'Print' button.
- Press 'Print' to start the printing process. The printer should automatically start printing.
