![]() Size of this JPG preview of this PDF file: 424 × 600 pixels. |
Original file (1,239 × 1,752 pixels, file size: 1.45 MB, MIME type: application/pdf, 15 pages)
This project designed and analysed the voltage profile of a low voltage 415V, 50Hz distribution network of Western Power Distribution (National Grid), Dunkirk case study, a part of Nottingham Network, the network topology is given in Figure 1 [1]. The line consists of ten (10) equally distributed identical loads with a modern Distributed Generation (DG) facility connected to node three (3), the line and load impedances are shown in Table I [1]. The DG was used to inject active and reactive power independently into the network to provide voltage compensation down the line as discussed later in this report.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 10:26, 19 August 2024 | ![]() | 1,239 × 1,752, 15 pages (1.45 MB) | Abdulazeezao (talk | contribs) | Uploaded own work with UploadWizard |
You cannot overwrite this file.
File usage
The following page uses this file: