Agumented reality sandbox
This page describes instructions for the Augmented Reality Sandbox.
First plug in the power cord, then turn on the computer and projector then click login and the main program will open. If you want to exit the main program just click esc on the keyboard.
You shouldn't need to calibrate it but incase you do open up the calibration app on the home screen and use the disc with a cross on it to calibrate the system. Line up the middle of the cross on the disc to the middle cross on the sandbox then press 1 when its lined up after you press 1 the line will move and you just have to move the disc to the new spot and press 1 when its lined up. Continue this process till calibration is complete.
If you want to adjust the sea level open up the app on the home screen titled sea level. When the app open you will see numbers and there is already a spot named where you can adjust the sea level. Then when you're done close the application and then it will be adjusted in the main program.
There are some special features to the sandbox like rain or floods. To make it rain just hold your hand above the sand and spread your fingers over the area you want it to rain. To make it flood and pour rain all over the sandbox hold down 1, to drain all the water in the sandbox hold down 2.
To turn off the sandbox just turn off the projector and turn off the computer.
