J.M.Pearce (talk | contribs) mNo edit summary |
J.M.Pearce (talk | contribs) mNo edit summary |
||
Line 8: | Line 8: | ||
# Print your design on your [[RepRap]] using an appropriate fill for a human dangling from a cliff | # Print your design on your [[RepRap]] using an appropriate fill for a human dangling from a cliff | ||
# Post your SCAD, STL and a picture of your print on Thingiverse as a derivative of [http://www.thingiverse.com/thing:481050] using an appropriate OS license | # Post your SCAD, STL and a picture of your print on Thingiverse as a derivative of [http://www.thingiverse.com/thing:481050] using an appropriate OS license | ||
Revision as of 09:29, 18 August 2019
This project is to design and print a rock wall hold.
- Create Thingiverse Account
- Download template SCAD for hex bolt: [1]
- Using OpenSCAD design an original rock wall hold better than this. No derivatives from any other design, no mashups, no importation of other code
- Print your design on your RepRap using an appropriate fill for a human dangling from a cliff
- Post your SCAD, STL and a picture of your print on Thingiverse as a derivative of [2] using an appropriate OS license