This special page shows all uploaded files.
Date | Name | Thumbnail | Size | Description | Versions |
---|---|---|---|---|---|
21:02, 4 May 2013 | 3D Funk Squad umbrella.jpeg (file) | 341 KB | The team 3D Funk Squad. From left to right, Jessica Dominguez, Flynn Manetta-Tomlinson, Julia King, and in front, John Aitchison. | 1 | |
20:57, 4 May 2013 | 3D Funk Squad.jpeg (file) | 160 KB | The team 3D Funk Squad. From left to right, Jessica Dominguez, Flynn Manetta-Tomlinson, Julia King, and in front, John Aitchison. | 1 | |
01:51, 29 April 2013 | 3D Insert.jpg (file) | 10 KB | The insert for the Forever Dry | 1 | |
01:50, 29 April 2013 | 3D Base.jpg (file) | 11 KB | The Base of the Forever Dry | 1 | |
01:48, 29 April 2013 | Sliding Clasp.jpg (file) | 11 KB | The sliding clasp of the Forever Dry | 1 | |
01:41, 29 April 2013 | Finished umbrella.jpg (file) | 45 KB | The completed umbrella. | 1 | |
01:25, 29 April 2013 | After the cut.JPG (file) | 6.08 MB | How the umbrella looks after the excess fabric is cut away. | 1 | |
01:19, 29 April 2013 | Putting in the insert.JPG (file) | 6.26 MB | Twisting the insert into the base to secure the fabric. | 1 | |
01:05, 29 April 2013 | Middle clasps.JPG (file) | 6.42 MB | The clasps attached at the middle. | 1 | |
23:00, 28 April 2013 | Final testing.jpg (file) | 39 KB | The Forever Dry stood up to our testing | 1 | |
22:14, 28 April 2013 | Clip on the end.JPG (file) | 6.26 MB | How a 3D clasp is supposed to look on the end | 1 | |
21:55, 28 April 2013 | Sliding Clasps.jpg (file) | 13 KB | How the sliding clasps are fit into the base. | 1 | |
21:48, 28 April 2013 | 3D Part on the umbrella.JPG (file) | 6.34 MB | A 3D part attached to the umbrella. | 1 | |
21:30, 28 April 2013 | Twist ties.jpeg (file) | 5.89 MB | A before and after of how the ties should look. | 1 | |
03:19, 15 April 2013 | Clipstl.png (file) | 4 KB | Two of these pieces can be slid into the base of the Forever Dry 3D part to be clasped around the umbrella frame, securing the fabric to the umbrella. | 1 | |
03:14, 15 April 2013 | Insertstl.png (file) | 7 KB | This piece that is inserted into the base of the Forever Dry 3D part and twisted to fasten the fabric into place. | 1 | |
03:08, 15 April 2013 | Stlbig.png (file) | 13 KB | The base for the Forever Dry 3D part. Fabric is placed is over the part and an additional piece is snapped into it to create a waterproof fastener. | 1 | |
21:31, 10 February 2013 | By the water.jpg (file) | 41 KB | 1 | ||
21:21, 10 February 2013 | Julia KIng.jpg (file) | 194 KB | A picture of me | 1 |