No higher resolution available.
Plastic-hinge-opening-close.JPG (640 × 480 pixels, file size: 50 KB, MIME type: image/jpeg)
The opening plastic hinge is attached with screws and staples to the OSB on one side and the underside of a 10x20mm stick on the other. Then holes are drilled in the stick every 30cm which go through the mating OSB. Through these holes, machine screws are dropped during assembly. 33 screws for the whole building. 1-2 hours to assemble, 20 minutes to disassemble.
The plastic is propaflex. See propagroup.com > impact and handling problems > propaflex
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 14:13, 14 February 2013 | | 640 × 480 (50 KB) | Andrewed (talk | contribs) | The opening plastic hinge is attached with screws and staples to the OSB on one side and a small dimension stick on the other, about 10x20mm. Then holes are drilled in the stick every 30cm which go through the mating OSB. Through these holes, machine scre |
You cannot overwrite this file.
File usage
The following page uses this file:
